Anthem Integrated 225

Stereo/

Integrert forsterker/

Fra kr 10.000 til kr 35.000/

Anthem Integrated 225

Vis stort bilde

Anthem Integrated 225

Kr 14.995

Phono input, front panel input for portable music players, 225 continuous watts per channel into 8 ohms, 4-ohm capability, remote control. Available in black or silver.

Les mer

The Integrated 225 is sleek, its outlook minimalist. It doesn’t call attention to itself in any overt way yet when it sits in the A/V rack, you can’t help noticing just how good it looks. The inside story is similar: high-quality component parts; critical inputs are buffered to prevent crosstalk; a combination active/passive “EQ” technology in the phono stage unlocks all of the magic hidden in those vinyl grooves … with a transparency, refinement and detail that should be far more expensive, but isn’t.

Teknisk

PHONO PREAMPLIFIER
The phono preamplifier is suitable for moving magnet and high-output moving coil cartrdiges

Input Impedance

47 kΩ

Input Capacitance

100 pF

Maximum Input

18 mV at 20 Hz, 140 mV at 1 kHz, 160mV at 20 kHz

Gain (at 1 kHz)

35 dB

Crosstalk (at 1 kHz)

80 dB

RIAA Response

+/- 0.5 dB (100 Hz to 20 kHz); -1 dB (20 Hz)

THD+N (at 1 kHz, 5 mV input)

0.05%

S/N Ratio (ref. 5 mV at 1 kHz, IEC-A filter)

83 dB

PREAMPLIFIER

Input Impedance

30 kΩ

'Pre-Out' Output Impedance

560 Ω

'Rec-Out' Output Impedance

100 Ω

Rated Input

1.0 Vrms

Maximum Input

7.6 Vrms

Minimum Load

5 kΩ

Rated Output (100 k1 load)

1.0 Vrms

Maximum Output (100 k1 load)

7.6 Vrms

Headphone Output

500 mW into 32 Ω at 0.03% THD+N

Channel Separation (at 1 kHz)

75 dB

Crosstalk Between Inputs (at 1 kHz)

72 dB

XLR Pin Configuration

Pin 1: Ground; Pin 2: Positive; Pin 3: Negative

Frequency Response and Bandwidth

20 Hz to 20 kHz (+0, -0.1 dB); 1 Hz to 170 kHz (+0, -3 dB)

THD+N (at rated input and output, 80 kHz BW)

0.003%

IMD (CCIF at 15 kHz and 16 kHz)

0.0005%

S/N Ratio (A-weighted, ref 2.0 Vrms)

105 dB

POWER AMPLIFIER
(per channel, continuous RMS, 20 Hz to 20 kHz, <1.0% THD)

Frequency Response

20 Hz to 20 kHz (+0, -0.15 dB)

Bandwidth

1 Hz to 200 kHz (+0, -3 dB)

THD+N

0.01% at 1 kHz, 0.03% at 20 kHz (100 W into 8 1)

Power Bandwidth

< 10 Hz to 100 kHz (+0, -3 dB, 200 W into 8 1)

Slew Rate

25 V/µs

Headroom

1.4 dB (8 1), 2.8 dB (4 1)

Damping Factor

80 at 1 kHz (ref. 8 1)

S/N Ratio (A-weighted, ref 225 W)

105 dB

Crosstalk

> 57 dB (100 Hz to 10 kHz)

Voltage Gain

29 dB

CONTROL

Infra Red

Carrier Frequency

38 kHz

Max. Emitter Current

Pass-through of input

Trigger

Input Polarity

Non-polarized

Output

Pass-through of input

POWER REQUIREMENTS

Impedance	8Ω		4Ω
# of Channels Driven	1	Both	1	Both
*Short Term	240 W	225 W (FTC)	330 W	310 W*

Power Consumption (8 Ω load)

Maximum

800 W

Typical

300 W

Fuse Rating (Fuse is internal)

Anthem serviceable only

Low Voltage Version: In countries where the line voltage is 120V, this product operates from a single phase AC power source that supplies between 108V and 132V at a frequency of 60 Hz.

High Voltage Version: In countries where the line voltage is 220V, 330V or 240V, this product operates from a single phase AC power source that supplies between 216V and 264V at a frequency of 50 or 60 Hz.

Dimensions

Width

5-7/8 inches (14.9 cm) including feet

Height

Width 17-1/4 inches (43.8 cm)

Depth

18 inches (45.7 cm)

Weight (Unpacked)

42.6 lb (19.4 kg)

Kjøp / still spørsmål om dette produktet